garment steamer pump JYPS-5E farbic Clothes handled Steamers pumps
Parameter:
1. Voltage, frequency: AC100-127V/60HZ / AC220-240V/50&60HZ
2. Flow rate: 12-100g/min
3. Rated power: ≤ 7W
4. Pressure: In the cold state, the external diode board is connected to the test, and the pressure generated by the outlet end of the water pump in the fully closed state is ≥ 0.25Bar
5. Pressure leakage: ≥4KPa
6. Vacuum; vacuum value range: ≤ -0.15Bar
7. Pumping: within 10s, pump water at a height of 50cm
8. Noise: 100cm away from the pump body, pumping noise ≤ 45 dB (environmental noise ≤ 40dB)
9. Attenuation: 10min continuous test, thermal attenuation≤15%
Life:
4. Life: (1) Under the rated voltage and frequency, 8min on/8min off cycle pumping work for 1000H, the flow change range does not exceed 30%
(2) Under the input rated voltage and frequency, the pump works without abnormality after 400H of continuous dry pumping.
(3) Under the input rated voltage and frequency, the pump stops for 1H, and the dry pumping cycle is performed for 1H. After continuous operation for 800H, the pump works without abnormality.